Canada

More E-Stop Questions

Posted on
This entry is part 17 of 16 in the series Emer­gency Stop

Here are some more ques­tions I’ve been asked regard­ing emer­gency stop require­ments. These ones came to me through the IEEE PSES EMC-PSTC Product Com­pli­ance For­um mail­ing list. Primary Sources There are three primary sources for the require­ments for emer­gency stop devices: [1] Safety of machinery — Emer­gency stop — Prin­ciples for design, 3rd Edi­tion. ISO 13850. 2015. [2] Safety of […]

Complementary Protective Measures

Can Emergency Stop be used as an “on/off” control?

Posted on
Emergency Stop Button
This entry is part 16 of 16 in the series Emer­gency Stop

Every couple of months I get an email ask­ing me if there is any reas­on why e-stop func­tions can’t be used as the primary power con­trol (on/off but­ton) for machinery. Fol­low­ing a recent exchange, I thought I would share the reas­ons for why this is such a bad idea. The short answer The short answer is an unequi­voc­al NO. Don’t […]

Complementary Protective Measures

Introduction to Functional Safety Seminars

Posted on
Man training a group of people, pointing to Functional Safety topics on the whiteboard

If you are inter­ested in func­tion­al safety, and I know many read­ers are based on the stat­ist­ics I see for my oth­er func­tion­al safety-related posts, I think you will be inter­ested in this. I am col­lab­or­at­ing with the IEEE Product Safety Engin­eer­ing Society’s Vir­tu­al Chapter to provide a series of three 35 minute sem­inars dis­cuss­ing the fun­da­ment­als of func­tion­al safety. The […]