Canada

CSA Z432 Safeguarding of Machinery – 3rd Edition

Posted on

If you build machinery for the Cana­dian mar­ket, or if you modi­fy equip­ment in Cana­dian work­places, you will be famil­i­ar with CSA Z432, Safe­guard­ing of Machinery. This stand­ard has been around since 1992, with the last major revi­sion pub­lished in 2004. CSA has recon­vened the Tech­nic­al Com­mit­tee respons­ible for this import­ant stand­ard to revise the […]

CE Mark

Emergency stop devices: the risks of installer liability

Posted on
This entry is part 10 of 16 in the series Emer­gency Stop

On the MachineBuilding.net blog today, Alex D’Arcy, Sales Dir­ect­or at Hylec-APL provides some inter­est­ing insights into the liab­il­it­ies asso­ci­ated with the install­a­tion of emer­gency stop devices on machinery. Hylec-APL provides tech­nic­al products and solu­tions in the field of indus­tri­al machinery and emer­gency stop sys­tems. Check out Alex’s art­icle. If you need to know more about the […]

CE Mark

How to migrate from EN 954 – 1 to EN ISO 13849 – 1 or EN 62061

Posted on

Editor’s note – When I read this art­icle on the machinebuilding.net blog, I thought that it was import­ant enough that we should reprint it here. The text includes links to the machinebuilding.net web site. These resources can def­in­itely help you in apply­ing this inform­a­tion. If you have ques­tions that you would like to dis­cuss, please con­tact me and […]

Canada

Interlocking Devices: The Good, The Bad and the Ugly

Posted on
This entry is part 1 of 7 in the series Guards and Guard­ing

Note: A short­er ver­sion of this art­icle was pub­lished in the May-2012 edi­tion of  Man­u­fac­tur­ing Auto­ma­tion Magazine. When design­ing safe­guard­ing sys­tems for machines, one of the basic build­ing blocks is the mov­able guard. Mov­able guards can be doors, pan­els, gates or oth­er phys­ic­al bar­ri­ers that can be opened without using tools. Every one of these guards […]

Control Functions

31-Dec-2011 – Are YOU ready?

Posted on
This entry is part 8 of 8 in the series Cir­cuit Archi­tec­tures Explored

31-Decem­ber-2011 marks a key mile­stone for machine build­ers mar­ket­ing their products in the European Uni­on, the EEA and many of the Can­did­ate States. Func­tion­al Safety takes a pos­it­ive step for­ward with the man­dat­ory applic­a­tion of EN ISO 13849 – 1 and -2. As of 1-Janu­ary-2012, the safety-related parts of the con­trol sys­tems on all machinery bear­ing a CE Mark will be […]

Control Functions

Inconsistencies in ISO 13849 – 1:2006

Posted on
This entry is part 7 of 8 in the series Cir­cuit Archi­tec­tures Explored

I’ve writ­ten quite a bit recently on the top­ic of cir­cuit archi­tec­tures under ISO 13849 – 1, and one of my read­ers noticed an incon­sist­ency between the text of the stand­ard and Fig­ure 5, the dia­gram that shows how the cat­egor­ies can span one or more Per­form­ance Levels. If you look at Cat­egory 2 in Fig­ure 5, you will notice […]

Control Functions

Interlock Architectures Pt. 6 – Comparing North American and International Systems

Posted on
industrial Control Console
This entry is part 6 of 8 in the series Cir­cuit Archi­tec­tures Explored

I’ve now writ­ten six posts, includ­ing this one, on the top­ic of cir­cuit archi­tec­tures for the safety-related parts of con­trol sys­tems. In this post, we’ll com­pare the Inter­na­tion­al and North Amer­ic­an sys­tems. This com­par­is­on is not inten­ded to draw con­clu­sions about which is “bet­ter”, but rather to com­pare and con­trast the two sys­tems so that […]

Control Functions

Interlock Architectures – Pt. 5: Category 4 — Control Reliable

Posted on
This entry is part 5 of 8 in the series Cir­cuit Archi­tec­tures Explored

Ed. note: I’ve made a few updates to this art­icle since it was first pub­lished in 2011, with the most recent today, 6-Dec-18. – DN – The most reli­able of the five sys­tem archi­tec­tures, Cat­egory 4 is the only archi­tec­ture that uses mul­­tiple-fault tol­er­ant tech­niques to help ensure that com­pon­ent fail­ures do not res­ult in an unac­cept­able […]

Control Functions

Interlock Architectures – Pt. 4: Category 3 – Control Reliable

Posted on
Category 3 Architecture Logic Block Diagram
This entry is part 4 of 8 in the series Cir­cuit Archi­tec­tures Explored

Cat­egory 3 sys­tem archi­tec­ture is the first cat­egory that could be con­sidered to have sim­il­ar­ity to “Con­trol Reli­able” cir­cuits or sys­tems as defined in the North Amer­ic­an stand­ards. It is not the same as Con­trol Reli­able, but we’ll get to in a sub­sequent post. If you haven’t read the first three posts in this series, you may […]