Machinery Safety 101

Five reasons you should attend our Free Safety Talks

Banner for the Free Safety Talks

Reas­on #1 – Free Safety Talks You can­’t argue with Free Stuff! Last week we partnered with Schmersal Canada and Frank­lin Empire to put on three days of Free Safety Talks. We had full houses in all three loc­a­tions, Wind­sor, Lon­don and Cam­bridge, with nearly 60 people par­ti­cip­at­ing. We had two great presenters who helped…

Read More

Q & A: Can Safety PLCs be used for Lockout?

Disconnect Switch with Lock and Tag
This entry is part 2 of 2 in the series Q&A

The ques­tion of lock­out and the use of safety PLCs as a means to meet the lock­out require­ments comes up more and more fre­quently these days. Can Safety PLCs be used for lock­out? Safety pro­fes­sion­als don’t always agree on this con­tro­ver­sial top­ic! Dur­ing the Free Safety Talks that we did with Schmersal Canada and Frank­lin Empire, this…

Read More

Understanding the Hierarchy of Controls

The Hierarchy of Controls illustrated as an inverted triangle with each level of the hierarchy written one above the other, starting with Inherently Sfe design, then Engineering Controls, then Information for Use, then Administrative Controls and finally descending to PPE at the bottom. An arrow with the text "Effectiveness" on it runs parallel to the triangle and points downward from Inherently safe design to PPE.
This entry is part 4 of 5 in the series Hier­archy of Con­trols

(Eds. note: This art­icle was ori­gin­ally writ­ten in 2011 and was updated in Nov. 2018.) The “Hier­archy of Con­trols” is one approach to risk reduc­tion that has become entrenched in the Occu­pa­tion­al Health and Safety (OHS) sec­tor. There are oth­er approaches to risk reduc­tion which are equally effect­ive but are less rigidly struc­tured. If you…

Read More

Using E‑Stops in Lockout Procedures

This entry is part 6 of 16 in the series Emer­gency Stop

Emer­gency stop devices are some­times, incor­rectly, used as part of a lock­out pro­ced­ure for machinery. Learn more about how to cor­rectly used these devices as part of Haz­ard­ous Energy Con­trol Pro­ced­ures for indus­tri­al machinery.

Read More

Busting Emergency Stop Myths

Emergency Stop on machine console
This entry is part 5 of 16 in the series Emer­gency Stop

There are a num­ber of myths that have grown up around emer­gency stops over the years. These myths can lead to injury or death, so it’s time for a little Myth Bust­ing here on the MS101 blog!

Read More
All original content on these pages is fingerprinted and certified by Digiprove