Machinery Safety 101

Interlocking Devices: The Good, The Bad and the Ugly

This entry is part 1 of 7 in the series Guards and Guard­ing

Note: A short­er ver­sion of this art­icle was pub­lished in the May-2012 edi­tion of  Man­u­fac­tur­ing Auto­ma­tion Magazine. When design­ing safe­guard­ing sys­tems for machines, one of the basic build­ing blocks is the…

Read More

Interlock Architectures – Pt. 4: Category 3 – Control Reliable

Category 3 Architecture Logic Block Diagram
This entry is part 4 of 8 in the series Cir­cuit Archi­tec­tures Explored

This post was updated on 2020-03-28. Cat­egory 3 sys­tem archi­tec­ture is the first cat­egory that could be con­sidered to have sim­il­ar­ity to “Con­trol Reli­able” cir­cuits or sys­tems as was defined in…

Read More

Understanding the Hierarchy of Controls

The Hierarchy of Controls illustrated as an inverted triangle with each level of the hierarchy written one above the other, starting with Inherently Sfe design, then Engineering Controls, then Information for Use, then Administrative Controls and finally descending to PPE at the bottom. An arrow with the text "Effectiveness" on it runs parallel to the triangle and points downward from Inherently safe design to PPE.
This entry is part 4 of 5 in the series Hier­archy of Con­trols

(Eds. note: This art­icle was ori­gin­ally writ­ten in 2011 and was updated in Nov. 2018.) The “Hier­archy of Con­trols” is one approach to risk reduc­tion that has become entrenched in…

Read More

Interlock Architectures – Pt. 3: Category 2

ISO 13849-1 Figure 10
This entry is part 3 of 8 in the series Cir­cuit Archi­tec­tures Explored

This art­icle explores the require­ments for safety related con­trol sys­tems meet­ing ISO 13849 – 1 Cat­egory 2 require­ments. “Gotcha!” points in the defin­i­tion are high­lighted to help design­ers avoid this com­mon pit­falls.

Read More

Interlock Architectures – Pt. 2: Category 1

This entry is part 2 of 8 in the series Cir­cuit Archi­tec­tures Explored

This art­icle expands on the first in the series “Inter­lock Archi­tec­tures – Pt. 1: What do those cat­egor­ies really mean?”. Learn about the basic cir­cuit archi­tec­tures that under­lie all safety inter­lock sys­tems under ISO 13849 – 1, and CSA Z432 and ANSI RIA R15.06.

Read More
All original content on these pages is fingerprinted and certified by Digiprove