Canada

Testing Emergency Stop Systems

Posted on
This entry is part 11 of 16 in the series Emer­gency Stop

I’ve had a num­ber of ques­tions from read­ers regard­ing test­ing of emer­gency stop sys­tems, and par­tic­u­larly with the fre­quency of test­ing. I addressed the types of tests that might be needed in anoth­er art­icle cov­er­ing Check­ing Emer­gency Stop Sys­tems. This art­icle will focus on the fre­quency of test­ing rather than the types of tests. The Prob­lem Emer­gency […]

Canada

Safe Drive Control including Safe Torque Off (STO)

Posted on
Graph illustrating STO Function
This entry is part 12 of 16 in the series Emer­gency Stop

Ed. Note: This art­icle was revised 25-Jul-17 to include inform­a­tion on safe stand­still. Safe Drive Con­trol includ­ing STO Motor drives are every­where. From DC vari­able speed drives and index­ing drives, through AC Vari­able Fre­quency drives, servo drives and step­per motor drives, the cap­ab­il­it­ies and the flex­ib­il­ity of these elec­tron­ic sys­tems has giv­en machine design­ers unpre­ced­en­ted […]

Emergency Stop

Emergency Stop Failures

Posted on
This entry is part 13 of 16 in the series Emer­gency Stop

I am always look­ing for inter­est­ing examples of machinery safety prob­lems to share on MS101. Recently I was scrolling Reddit/r/OSHA and found these three real-world examples. Broken Emer­gency Stop But­tons The first and most obvi­ous kinds of fail­ures are those res­ult­ing from either wear out or dam­age to emer­gency stop devices like e‑stop but­tons or pull […]

Complementary Protective Measures

Emergency Stop Pull-Cords

Posted on
This entry is part 15 of 16 in the series Emer­gency Stop

This art­icle was updated 2019-04-26, adding spe­cif­ic details related to IEC 60947 – 5‑5. When it comes to emer­gency stop devices there is no doubt that the red mush­­room-head push but­ton is the most com­mon – they seem to be every­where. The second most com­mon emer­gency stop device is the pull-cord, and like the light-cur­­tain in safe­guard­ing […]

Complementary Protective Measures

Can Emergency Stop be used as an “on/off” control?

Posted on
Emergency Stop Button
This entry is part 16 of 16 in the series Emer­gency Stop

Every couple of months I get an email ask­ing me if there is any reas­on why e‑stop func­tions can­’t be used as the primary power con­trol (on/off but­ton) for machinery. Fol­low­ing a recent exchange, I thought I would share the reas­ons for why this is such a bad idea. The short answer The short answer is an unequi­voc­al NO. Don’t […]

Canada

More E‑Stop Questions

Posted on
This entry is part 17 of 16 in the series Emer­gency Stop

Here are some more ques­tions I’ve been asked regard­ing emer­gency stop require­ments. These ones came to me through the IEEE PSES EMC-PSTC Product Com­pli­ance For­um mail­ing list. Primary Sources There are three primary sources for the require­ments for emer­gency stop devices: [1] Safety of machinery — Emer­gency stop — Prin­ciples for design, 3rd Edi­tion. ISO 13850. 2015. [2] Safety of […]