Control Functions

Q & A: Category 2 and Testing Intervals

Posted on
Logical block diagram for ISO 13849-1 Category 2 architecture.
This entry is part 1 of 2 in the series Q&A

Dur­ing the Free Safety Talks that we did with Schmersal Canada and Frank­lin Empire, we had a “hot ques­tion” come up regard­ing Cat­egory 2 archi­tec­ture and the test­ing inter­val require­ment. In the short video below, Doug answers that ques­tion. If you have more ques­tions or felt some­thing wasn’t clear in the video, leave us a com­ment and […]

Events

Five reasons you should attend our Free Safety Talks

Posted on
Banner for the Free Safety Talks

Reas­on #1 – Free Safety Talks You can’t argue with Free Stuff! Last week we partnered with Schmersal Canada and Frank­lin Empire to put on three days of Free Safety Talks. We had full houses in all three loc­a­tions, Wind­sor, Lon­don and Cam­bridge, with nearly 60 people par­ti­cip­at­ing. We had two great presenters who helped […]

Canada

ISO 13849 – 1 Analysis — Part 8: Fault Exclusion

Posted on
This entry is part 9 of 9 in the series How to do a 13849 – 1 ana­lys­is

Fault Con­sid­er­a­tion & Fault Exclu­sion ISO 13849 – 1, Chapter 7 [1, 7] dis­cusses the need for fault con­sid­er­a­tion and fault exclu­sion. Fault con­sid­er­a­tion is the pro­cess of examin­ing the com­pon­ents and sub-sys­tems used in the safety-related part of the con­trol sys­tem (SRP/CS) and mak­ing a list of all the faults that could occur in each one. This a def­in­itely non-trivi­al […]